Okki Go Integrations Setup: A 7-Step First Prospecting Workflow (From Someone Who Buys the Software, Not Runs It)
2026-10-09 · Lena Kovacs
-
Who this checklist is for
-
Step 1: Write your ICP on paper before you touch a single integration
-
Step 2: Wire Okki Go into the sources it needs to read from
-
Step 3: Set up firmographic filtering — this is where an agent-native prospecting workflow really lives
-
Step 4: Layer in an email validation API — and pay for a good one
-
Step 5: Configure cold email platform features before you send anything
-
Step 6: Keep a human in the loop for the first 200 sends
-
Step 7: Run one small batch, measure, and only then scale
-
Things that go wrong (and how to spot them early)
Who this checklist is for
I'm the office administrator for a 42-person SaaS company. I handle all software and vendor purchasing — roughly $180,000 a year across 14 vendors. I report to both operations and finance, which means I get yelled at from two directions when something I bought doesn't work.
I don't run outbound. I buy the tools that other people run outbound with. When our sales lead asked me to vet Okki Go before we signed, I put together a version of this checklist. If you're in a similar seat — or you're the SDR/RevOps person inheriting whatever I bought — here's the sequence that actually works, in the order I wish people would follow it.
Seven steps. Skip any of them and you'll be back here in six weeks.
Step 1: Write your ICP on paper before you touch a single integration
Industry, employee count band, revenue band, geography, tech stack signals. That's it. Keep it to one card.
Most buyers jump straight to plugging in Okki Go integrations, importing a list, and then wondering why reply rates crater. The tool isn't usually the problem — the boundaries you fed it were.
My personal rule: if your ICP description could apply to any B2B company doing roughly the same thing, it's not specific enough. "B2B SaaS, 50-500 employees" is a data filter. "B2B SaaS, 50-500 employees, Series A or B in the last 12 months, North America, already using HubSpot" is an ICP.
Step 2: Wire Okki Go into the sources it needs to read from
Okki Go integrations roughly fall into three buckets:
- Customer data platforms — your CRM (HubSpot, Salesforce, Pipedrive, whatever you're on)
- Prospecting sources — LinkedIn, Apollo-style databases, if your seats allow
- Sending infrastructure — email platforms and email validation APIs
Start with the CRM. If you don't have a CRM yet, stop here and fix that — running outbound into a black hole teaches you nothing.
Two practical things to check that nobody warns you about:
- Which API key is the integration running on — yours or the vendor's? If it's the vendor's, what happens when you cancel?
- Where does the data land if permissions fail?
That second question cost me. During a 2023 rollout at my last company, a bad workspace mapping pushed two weeks of contact syncs into an archived account. Nobody noticed until a rep complained the list "just wasn't updating." That one took 9 days to sort out — actually, closer to 12 when you count the re-authorization mess.
Step 3: Set up firmographic filtering — this is where an agent-native prospecting workflow really lives
Firmographic filtering (meaning filtering on company-level attributes, not just job titles) is the step most people skip because they assume a title filter does the same job. It doesn't.
In an agent-native prospecting workflow, firmographic filtering is where the agent decides its own boundaries before pulling contacts. You give it: employee count, industry, funding stage, geography, tech stack signals. The agent then goes off and pulls — or doesn't pull — accordingly. Everything downstream inherits those choices.
What to check when you're configuring this in Okki Go:
- Does the agent filter proactively, or only when you type a filter in manually? If it's the latter, you've bought a database, not an agent.
- Are filters saved and versionable? If you can't re-run the same query three months later, you can't compare results.
- How does it handle partial matches? "SaaS" and "software" are not the same thing, and the agent's decision here matters more than you'd think.
My mistake: I once let a filter run with "revenue > $10M" AND "headcount 20-50." That combination barely exists. Three days gone, and I still feel a little bad about the API spend.
Step 4: Layer in an email validation API — and pay for a good one
Here's what nobody wants to say out loud: most buyers focus on cost-per-contact and completely miss the real cost of a validated email going bad.
A bad email costs you:
- Bounce credits you've already paid for
- Sender domain reputation damage you can't fully reverse
- Rep time on dead leads
- Per-send costs if your platform bills on volume
Add those up and they tend to exceed the per-email delta between a cheap validator and a solid one. Usually by a lot.
Minimum feature set for the email validation API you choose:
- Real-time syntax + MX record checks
- Disposable/role-based email detection
- Catch-all domain identification (mark as "risky," not as a coin flip)
- A confidence score instead of a binary valid/invalid flag
I still kick myself for going with the cheaper validator in 2022. Half a cent per email looked reasonable, right up until our bounce rate hit 8%, our sending domain got throttled for two weeks, and we missed a Q1 pipeline target. The savings were real. They were also about 4% of what the two-week throttle cost us.
To be fair, cheap validation works fine for low-stakes lists. This wasn't one of those.
Step 5: Configure cold email platform features before you send anything
The question everyone asks is "how good is the built-in automation?" The question they should ask is "how does this platform protect my sending domain, and what happens when something breaks?"
Here's the cold email platform feature set I check first:
- Sending volume controls and warmup ramps
- Bounce handling — auto-pause, or does it keep firing into a dead address?
- Reply detection — can it distinguish a human reply from an auto-responder?
- Domain rotation if you're using multiple sending subdomains
If you're integrating with Okki Go, confirm whether the platform receives the list from the agent or whether the agent handles sending natively. Those two architectures fail very differently. One fails with a list problem. The other fails with a domain problem that takes weeks to unwind.
Per FTC advertising guidance, any claimed metric around deliverability, reply rate, or accuracy has to be substantiated — not just showcased. If a vendor won't hand over raw benchmark data when you ask, assume the worst case.
Step 6: Keep a human in the loop for the first 200 sends
Human-in-the-loop outreach (i.e., nothing goes out until you've reviewed it) sounds bureaucratic. It's not — it's the cheapest QA you'll ever run.
For the first 200 send attempts, scan each one. Not rewriting — scanning:
- Does the first line read like a template?
- Is the company detail correct?
- Is any variable wrong-name wrong-company wrong-industry?
I have somewhat mixed feelings about AI-driven outreach. On one hand, the throughput is genuinely faster than any team we've run before. On the other, the failure modes are quieter than a human's — you don't hear the typo, you just see the reply rate slip a point. Keeping the human step in for the first batch is the compromise that's worked for us.
Once your error rate is under ~2% for two straight weeks, loosen the leash.
Step 7: Run one small batch, measure, and only then scale
Pick one ICP segment. 100 contacts max. Run the entire config once before you add anything else.
What to track:
- Validation pass rate (not acceptance rate)
- Bounce rate — keep it under 2%, ideally under 1%
- Reply rate, ignoring anything auto-responderish
- Open rate on validated contacts — does it actually move?
Most first-time setups take three batches to trust their own numbers. Budget for that. It's fairly normal.
Things that go wrong (and how to spot them early)
- Changing your ICP after you've already configured Step 3 filters. Your contacts and your filters will quietly disagree.
- Running one dedupe rule in the validation API and a different one in the sending platform. Contact match rates drop, and you double-send without realizing it.
- Wiring Okki Go integrations before you've checked whether your sending domain has been blacklisted. Sometimes it already has.
- Treating "the agent produced 5,000 contacts" as a success signal. Volume is table stakes. Signal quality is the actual number.
And one that isn't a step but probably should be: agent-native doesn't mean hands-off. It means the tool handles volume and you handle judgment. Worth paying for at speed. Not worth trusting blindly.
If you're staring down a launch date and choosing between a config that probably works and one that costs a bit more but you know works — pay for the known. Uncertainty is cheap right up until it isn't.